top of page

特別賛助企業

公開·9名のメンバー
Vadim Savin
Vadim Savin

Advanced Installer Silent Install Sql Express On Windows


Once the SQL Server Express 2019 prerequisite is added to our installation package, we can configure the settings to ensure a fully silent installation of the main installer package (when triggered with the silent parameters).




Advanced Installer Silent Install Sql Express On Windows



The above parameter controls the level of GUI display during the install. It will only display the setup progress but will not allow you to add any input or show any error messages. If you want a fully silent install with no dialog display, use the /qs parameter.


Installing a new instance of SQL Server from the command prompt enables you to specify the features to install and how they should be configured. You can also specify silent, basic, or full interaction with the Setup user interface.


Use the parameters in the following table to develop command-line scripts for failover cluster prepare. This is the first step in advanced cluster installation, where you have to prepare the failover cluster instances on all the nodes of the failover cluster. For more information, see Always On Failover Cluster Instances (SQL Server).


Use the parameters in the following table to develop command-line scripts for failover cluster complete. This is the second step in the advanced failover cluster install option. After you have run prepare on all the failover cluster nodes, you run this command on the node that owns the shared disks. For more information, see Always On Failover Cluster Instances (SQL Server).


To perform the "Completion" step of a failover cluster advanced installation scenario for the Database Engine and Analysis Services. Run the following command on the computer that will be the active node in the failover cluster to make it usable. You must run the "CompleteFailoverCluster" action on the node that owns the shared disk in the Analysis Services failover cluster.


Here, you can choose what features to install. By default, all features areinstalled with the exception of the debug symbols. If the "Database instance"feature is selected, the installer will create a database instance, by defaultrunning as a service. In this case the installer will present additionaldialogs to control various database properties. Note that you do notnecessarily have to create an instance at this stage. For example, if youalready have MySQL or MariaDB databases running as services, you can justupgrade them during the installation. Also, you can create additional databaseinstances after the installation, with the mysql_install_db.exe utility.


If you encounter a bug in the installer, the installer logs should be used fordiagnosis. Please attach verbose logs to the bug reports you create. To create a verboseinstaller log, start the installer from the command line with the /l*vswitch, like so:


Every InstallAware setup supports command line parameters for silent and logged installs. In addition, you may also set/override the values of variables used in your installation from the command line.


With the silent install command line parameter set, the entire installation will execute silently, without a user interface, or any user intervention. When input is required on dialog boxes, the default values of dialog controls will be used.


You may specify the password for encrypted setups on the command line. This will prevent displaying the password prompt box and attempt to use the password indicated on the command line. This option is most useful when used in conjunction with silent installations, since silent installations cannot prompt for a setup password.


This includes load & unload utilities, database management, administration and drivers and much more. They are used to connect to your Vantage Advanced SQL instance. Installation is easy and simple using a Windows installer. The size of the download zip file is 200 MB. To install, extract the zip file into a temporary folder and run the setup.exe program.


Assuming that you have already installed the appropriate version of Microsoft Windows onto your computer (or that has been pre-installed for you), make sure that the various prerequisites have been correctly added to your installation before trying to install SpiraPlan. The SpiraPlan installer will check to ensure that the various prerequisites are in place, and will abort the installation if any are missing, indicating to you what action needs to be taken.


The next page of the wizard will display a list of the required pre-requisites. The installer does not attempt to verify if these pre-requisites have been met or not. The information is displayed for information purposes only. If a pre-requisite is missing the application may display incorrectly.


The installer will verify the license information as you enter it. If the details entered are valid then the information will be displayed beneath the entry fields. This allows you to check that the correct application and license will be installed. On clicking Next, the installer will warn you of any discrepancies, and will not allow you to proceed until valid information has been provided.


If you checked "advanced" at the start of the installation process, you will have the option to choose where the application is installed. You can choose an existing folder or make a new one and select that. By default it is C:\Program Files (x86)\[Application Name]).


If installing in advanced mode, then on this screen you will able to change the name of the web-site URL that will be used to access the system. By default, users would need to type into their browsers: http://"server name"/[product name]. Should you want to have a different name change the name in the Virtual Directory box, otherwise simply accept the default name and click "Next".


SpiraPlan has an application (installed into a default folder on your system), a website (configured above), and a database. The next screen tells the installer how to connect to the database server on your system.


This is the easiest option when the application and database will be residing on the same server. It is the only option available for authentication during a standard installation. In this case, choose the "Windows Authentication" option and the Login/Password boxes will be disabled. In this case, the installer will connect to the database using your current Windows login to create the application database objects, and SpiraPlan will connect to the database during normal operation using either the ASPNET or NETWORK SERVICE Windows accounts (it depends on the version of the operating system).


This is the easiest option when the application and databases will be residing on different servers across the network. In this case, choose "SQL Server Authentication" and provide a SQL Server Login that has full sysadmin permissions -- e.g. the built in System Administrator (SA) account. The installer will use this sysadmin account to create the database objects, and SpiraPlan will use a special login (called "SpiraPlan" by default) for normal application operations.


In the "Server" box, you need to enter the name of the Microsoft SQL Server instance that is running on your system; the installer will default it to the hostname of the server (which in many cases will be correct). The easiest way to find out the database server name is to open up the SQL Server Administrative console (typically by clicking Start > Programs > Microsoft SQL Server > Enterprise Manager) and look for the name of the server.


Once you have entered the various pieces of information, click "Next". The installer will attempt to connect to the database using the provided information, and it will display an error message if any of the information is incorrect. Assuming the information is correct, the following screen will be displayed:


Once you have confirmed that everything is correct, click the "Install" button to actually begin the process of installing SpiraPlan onto your system. The installer will then display a progress bar as the installation proceeds. Once the installation is complete, the installer will provide confirmation, or display information about any problems it encountered.


You can upgrade any SpiraPlan version that is 5.4.0.4 or newer using our v6 installer (for instance you can upgrade from 5.4.0.4 to 6.10, or from 6.9.0.1 to 6.10 using the exact same installer exe). To upgrade an existing installation:


The next page of the wizard will display a list of the required pre-requisites and whether the installer could find them or not. The checks here are not fool-proof (in particular where a question mark is shown) so it is recommended to manually check the prerequisites in full as described above. The system will not require all prerequisites to be met before allowing the installation, but the application may display incorrectly if any are missing.


There may be a few cases where you need to customize the installation or upgrade of SpiraPlan. To enable the installer's advanced mode, make sure to check the "Advanced" checkbox at the relevant screen of the wizard.


Every time the installer attempts an operation (like an install or upgrade), it stores a log file. This is located at "c:\ProgramData\Inflectra\SpiraPlan". Each log file is labelled with the date and time of the operation. Please share the relevant files with the Inflectra support team if you need help troubleshooting the required operation.


Valid only during Controller upgrade. Usually, any site test failures are ignored and the upgrade proceeds. If omitted (or set to false), any site test failure causes the installer to fail, without performing the upgrade. Default = false


By default, when a machine restart is needed during an installation, the installer resumes automatically after the restart completes. To override the default, specify /noresume. This can be helpful if you must remount the media or want to capture information during an automated installation.


グループについて

グループへようこそ!他のメンバーと交流したり、最新情報をチェックしたり、動画をシェアすることもできます。

メンバー

bottom of page